SealYourWatch · Instructions
Step by step to a sealed watch
Follow the steps carefully for the best result. The video shows the entire process.
Video guide
How it works, in under 5 minutes
Step by step
Instructions at a glance
1
Clean the surface
Thoroughly clean the metal surface of your watch with the included degreaser. Make sure no oils, fingerprints, or dirt remain.
2
Apply the sealant
Apply the ceramic sealant thinly and evenly to the metal surfaces. Skip the dial and crystal. A uniform film is sufficient.
3
Let it cure
Allow the sealant to dry and cure for 24 hours at room temperature. During this time, it is still fully reversible.
4
Done: watch sealed
After 24 hours, the protective layer has cured and is invisible. Your watch is now protected against everyday scratches.
FAQ
Frequently asked questions
Yes! The coating is designed to work on any metal surface. It doesn't matter whether your watch is made of steel, gold, or platinum.
Don't worry! During the 24-hour drying time, everything is still reversible. If you're unsure or notice a mistake, you can simply remove the sealant with the included degreaser and cloth.
No. After curing, the protective layer is completely invisible and does not change the look or feel of the watch.